imap funktioniert nicht

uli27

New Member
Hallo,

ich habe nach dem "Der perfekte suse 10.3 server" ein ispconfig installiert. Funktioniert soweit alles bis auf die imap Postfaecher. Ich kann mit Thunderbird pop3 und smtp benutzen, allse bestens. Wenn ich jedoch imap mit thunderbird benutzen will, antwortet der server nicht. Kann mir jemand eien Tip geben?
 

Till

Administrator
Scahu bitte mal in die dovecot.conf Datei, ob dort imap aktiviert ist. Die Datei müsste unter /etc/dovecot/ liegen.
 

uli27

New Member
Dovecat gibt es bei mir leider nicht

Danke fuer den Tip, aber die Datei existiert nicht bei mir.

Ich habe Postfix mit Courier installiert. So wie ich das verstehe, ist Dovecat der Ersatz fuer Courier. Bewusst have ich Dovecat nicht extra installiert. Ist das bei der Syandartinstalation von Suse 10.3 im Textmodus dabei? Ist das so?

Das ist das erste mal, dass ich Postfix installiere. Kann man irgendwie pruefen, ob alles arbeitet?
 
Zuletzt bearbeitet:

Till

Administrator
Ok, sorry. Ich hatte das Howto falsch in Erinnerung. Courier ist in dem Fall natürlich richtig.

Ruf bitte mal:

/etc/init.d/courier-imap restart

auf, gibt es irgendwelche Fehlermeldungen. Außerdem poste mal die Ausgabe der beiden Folgenden Befehle:

netstat -tap

und:

iptables -L
 

uli27

New Member
Ich denke keine Fehlermeldung..

Danke fuer die Muehe. Hier die 3 Ausgaben:

zu 1:

server1:~ # /etc/init.d/courier-imap restart
Shutting down Courier-IMAP done
Starting Courier-IMAP done
server1:~ #

zu 2:

server1:~ # netstat -tap
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 *:cadlock *:* LISTEN 3146/rpc.rquotad
tcp 0 0 *:mysql *:* LISTEN 14003/mysqld
tcp 0 0 localhost:815 *:* LISTEN 3183/famd
tcp 0 0 *:sunrpc *:* LISTEN 3130/portmap
tcp 0 0 *:hosts2-ns *:* LISTEN 14732/ispconfig_htt
tcp 0 0 *:ftp *:* LISTEN 24451/proftpd: (acc
tcp 0 0 server.office.ho:domain *:* LISTEN 23314/named
tcp 0 0 server1.oettinge:domain *:* LISTEN 23314/named
tcp 0 0 localhost:domain *:* LISTEN 23314/named
tcp 0 0 *:smtp *:* LISTEN 24486/master
tcp 0 0 localhost:953 *:* LISTEN 23314/named
tcp 0 0 *:imaps *:* LISTEN 3075/couriertcpd
tcp 0 0 *:pop3s *:* LISTEN 3109/couriertcpd
tcp 0 0 *:pop3 *:* LISTEN 3095/couriertcpd
tcp 0 0 *:imap *:* LISTEN 5265/couriertcpd
tcp 0 0 *:www-http *:* LISTEN 14803/httpd2-prefor
tcp 0 0 *:ssh *:* LISTEN 2949/sshd
tcp 0 0 *:smtp *:* LISTEN 24486/master
tcp 0 0 localhost:953 *:* LISTEN 23314/named
tcp 0 0 *:https *:* LISTEN 14803/httpd2-prefor
tcp 0 1152 server1.oettinger.r:ssh 92.80.116.154%819:27148 ESTABLISHED 5207/0
server1:~ #

zu 3:

server1:~ # iptables -L
Chain INPUT (policy DROP)
target prot opt source destination
DROP tcp -- anywhere loopback/8
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT all -- anywhere anywhere
DROP all -- BASE-ADDRESS.MCAST.NET/4 anywhere
PUB_IN all -- anywhere anywhere
PUB_IN all -- anywhere anywhere
PUB_IN all -- anywhere anywhere
PUB_IN all -- anywhere anywhere
DROP all -- anywhere anywhere

Chain FORWARD (policy DROP)
target prot opt source destination
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED
DROP all -- anywhere anywhere

Chain OUTPUT (policy ACCEPT)
target prot opt source destination
PUB_OUT all -- anywhere anywhere
PUB_OUT all -- anywhere anywhere
PUB_OUT all -- anywhere anywhere
PUB_OUT all -- anywhere anywhere

Chain INT_IN (0 references)
target prot opt source destination
ACCEPT icmp -- anywhere anywhere
DROP all -- anywhere anywhere

Chain INT_OUT (0 references)
target prot opt source destination
ACCEPT icmp -- anywhere anywhere
ACCEPT all -- anywhere anywhere

Chain PAROLE (9 references)
target prot opt source destination
ACCEPT all -- anywhere anywhere

Chain PUB_IN (4 references)
target prot opt source destination
ACCEPT icmp -- anywhere anywhere icmp destination-unreachable
ACCEPT icmp -- anywhere anywhere icmp echo-reply
ACCEPT icmp -- anywhere anywhere icmp time-exceeded
ACCEPT icmp -- anywhere anywhere icmp echo-request
PAROLE tcp -- anywhere anywhere tcp dpt:ftp
PAROLE tcp -- anywhere anywhere tcp dpt:ssh
PAROLE tcp -- anywhere anywhere tcp dpt:smtp
PAROLE tcp -- anywhere anywhere tcp dpt:domain
PAROLE tcp -- anywhere anywhere tcp dpt:http
PAROLE tcp -- anywhere anywhere tcp dpt:hosts2-ns
PAROLE tcp -- anywhere anywhere tcp dpt:pop3
PAROLE tcp -- anywhere anywhere tcp dpt:https
PAROLE tcp -- anywhere anywhere tcp dpt:ndmp
ACCEPT udp -- anywhere anywhere udp dpt:domain
DROP icmp -- anywhere anywhere
DROP all -- anywhere anywhere

Chain PUB_OUT (4 references)
target prot opt source destination
ACCEPT all -- anywhere anywhere
server1:~ #
 

uli27

New Member
Ich denke keine Fehlermeldung..

Danke fuer die Muehe. Hier die 3 Ausgaben:

zu 1:

server1:~ # /etc/init.d/courier-imap restart
Shutting down Courier-IMAP done
Starting Courier-IMAP done
server1:~ #

zu 2:

server1:~ # netstat -tap
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 *:cadlock *:* LISTEN 3146/rpc.rquotad
tcp 0 0 *:mysql *:* LISTEN 14003/mysqld
tcp 0 0 localhost:815 *:* LISTEN 3183/famd
tcp 0 0 *:sunrpc *:* LISTEN 3130/portmap
tcp 0 0 *:hosts2-ns *:* LISTEN 14732/ispconfig_htt
tcp 0 0 *:ftp *:* LISTEN 24451/proftpd: (acc
tcp 0 0 server.office.ho:domain *:* LISTEN 23314/named
tcp 0 0 server1.oettinge:domain *:* LISTEN 23314/named
tcp 0 0 localhost:domain *:* LISTEN 23314/named
tcp 0 0 *:smtp *:* LISTEN 24486/master
tcp 0 0 localhost:953 *:* LISTEN 23314/named
tcp 0 0 *:imaps *:* LISTEN 3075/couriertcpd
tcp 0 0 *:pop3s *:* LISTEN 3109/couriertcpd
tcp 0 0 *:pop3 *:* LISTEN 3095/couriertcpd
tcp 0 0 *:imap *:* LISTEN 5265/couriertcpd
tcp 0 0 *:www-http *:* LISTEN 14803/httpd2-prefor
tcp 0 0 *:ssh *:* LISTEN 2949/sshd
tcp 0 0 *:smtp *:* LISTEN 24486/master
tcp 0 0 localhost:953 *:* LISTEN 23314/named
tcp 0 0 *:https *:* LISTEN 14803/httpd2-prefor
tcp 0 1152 server1.oettinger.r:ssh 92.80.116.154%819:27148 ESTABLISHED 5207/0
server1:~ #

zu 3:

server1:~ # iptables -L
Chain INPUT (policy DROP)
target prot opt source destination
DROP tcp -- anywhere loopback/8
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT all -- anywhere anywhere
DROP all -- BASE-ADDRESS.MCAST.NET/4 anywhere
PUB_IN all -- anywhere anywhere
PUB_IN all -- anywhere anywhere
PUB_IN all -- anywhere anywhere
PUB_IN all -- anywhere anywhere
DROP all -- anywhere anywhere

Chain FORWARD (policy DROP)
target prot opt source destination
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED
DROP all -- anywhere anywhere

Chain OUTPUT (policy ACCEPT)
target prot opt source destination
PUB_OUT all -- anywhere anywhere
PUB_OUT all -- anywhere anywhere
PUB_OUT all -- anywhere anywhere
PUB_OUT all -- anywhere anywhere

Chain INT_IN (0 references)
target prot opt source destination
ACCEPT icmp -- anywhere anywhere
DROP all -- anywhere anywhere

Chain INT_OUT (0 references)
target prot opt source destination
ACCEPT icmp -- anywhere anywhere
ACCEPT all -- anywhere anywhere

Chain PAROLE (9 references)
target prot opt source destination
ACCEPT all -- anywhere anywhere

Chain PUB_IN (4 references)
target prot opt source destination
ACCEPT icmp -- anywhere anywhere icmp destination-unreachable
ACCEPT icmp -- anywhere anywhere icmp echo-reply
ACCEPT icmp -- anywhere anywhere icmp time-exceeded
ACCEPT icmp -- anywhere anywhere icmp echo-request
PAROLE tcp -- anywhere anywhere tcp dpt:ftp
PAROLE tcp -- anywhere anywhere tcp dpt:ssh
PAROLE tcp -- anywhere anywhere tcp dpt:smtp
PAROLE tcp -- anywhere anywhere tcp dpt:domain
PAROLE tcp -- anywhere anywhere tcp dpt:http
PAROLE tcp -- anywhere anywhere tcp dpt:hosts2-ns
PAROLE tcp -- anywhere anywhere tcp dpt:pop3
PAROLE tcp -- anywhere anywhere tcp dpt:https
PAROLE tcp -- anywhere anywhere tcp dpt:ndmp
ACCEPT udp -- anywhere anywhere udp dpt:domain
DROP icmp -- anywhere anywhere
DROP all -- anywhere anywhere

Chain PUB_OUT (4 references)
target prot opt source destination
ACCEPT all -- anywhere anywhere
server1:~ #
 

Till

Administrator
Öffne bitte mal Port 143 für tcp und udp in der ISPConfig Firewall. Wenn Du auch Imaps nutzen möchtest, öffne auch port 993.
 

uli27

New Member
Danke erst mal

Vielen Dank Till, es funktioniert erst mal ohne SSL Verschluesselung. Wenn ich die Firewall komplett ausschalte, sollten die SSL Verschluesselung eigentlich gehen.

Vielleicht wuerde es manchem helfen ein Howto "Einstellungen fuer verschiedene Emailclients" zu machen. Ich hab keines gefunden. Gibt es irgendwo eins?

Uli
 

Werbung

Top