cokotech
Member
... ich weiss.... wer meinen Namen sieht verzweifelt schon....
Ich versuche DKIM per DKIMProxy zu implementieren. Ich bin strikt nach der Anleitung auf http://dkimproxy.sourceforge.net/ vorgegangen. Die beiden Dienste laufen auch.
Meine Postfix Konfigs:
master.cf
main.cf
Wenn ich von Outlook aus Port 25 benutze signiert er nicht, das ist wohl auch normal. Nur wenn ich wie beschrieben Port 587 benutze, dann hängt er in der Abfrage Benutzername/Kennwort und meldet im syslog:
Das ist mit Sicherheit irgendeine Pillepalle aber ich bin echt zu doof dazu....
Wer hat das Wissen mir Dummie zu erklären was da Sache ist. Ich vermute mal das für den Dienst unter Port 587 noch ein paar Einstellungen vom Port 25 (.. also die normalen Einstellungen= übernommen werden müssen. Ich experimentioere gern, meist endet es dann aber in einer Neuinstallation!
Danke im Vorraus
Gruß Sven
Ich versuche DKIM per DKIMProxy zu implementieren. Ich bin strikt nach der Anleitung auf http://dkimproxy.sourceforge.net/ vorgegangen. Die beiden Dienste laufen auch.
Meine Postfix Konfigs:
master.cf
Code:
#
# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ==========================================================================
smtp inet n - - - - smtpd
submission inet n - n - - smtpd
-o smtpd_etrn_restrictions=reject
-o smtpd_sasl_auth_enable=yes
-o content_filter=dksign:[127.0.0.1]:10027
-o receive_override_options=no_address_mappings
-o smtpd_recipient_restrictions=permit_mynetworks,permit_sasl_authenticated,reject
dksign unix - - n - 10 smtp
-o smtp_send_xforward_command=yes
[FONT=Courier New][SIZE=1][FONT=Courier New][/FONT][/SIZE][/FONT][SIZE=1][FONT=Times New Roman]-o smtp_discard_ehlo_keywords=8bitmime,starttls[/FONT]
127.0.0.1:10028 inet n - n - 10 smtpd
-o content_filter=
-o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
-o smtpd_helo_restrictions=
-o smtpd_client_restrictions=
-o smtpd_sender_restrictions=
-o smtpd_recipient_restrictions=permit_mynetworks,reject
-o mynetworks=127.0.0.0/8
-o smtpd_authorized_xforward_hosts=127.0.0.0/8
#submission inet n - - - - smtpd
# -o smtpd_tls_security_level=encrypt
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
# -o milter_macro_daemon_name=ORIGINATING
#smtps inet n - - - - smtpd
# -o smtpd_tls_wrappermode=yes
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
# -o milter_macro_daemon_name=ORIGINATING
#628 inet n - - - - qmqpd
pickup fifo n - - 60 1 pickup
cleanup unix n - - - 0 cleanup
qmgr fifo n - n 300 1 qmgr
#qmgr fifo n - - 300 1 oqmgr
tlsmgr unix - - - 1000? 1 tlsmgr
rewrite unix - - - - - trivial-rewrite
bounce unix - - - - 0 bounce
defer unix - - - - 0 bounce
trace unix - - - - 0 bounce
verify unix - - - - 1 verify
flush unix n - - 1000? 0 flush
proxymap unix - - n - - proxymap
proxywrite unix - - n - 1 proxymap
smtp unix - - - - - smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay unix - - - - - smtp
-o smtp_fallback_relay=
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - - - - showq
error unix - - - - - error
retry unix - - - - - error
discard unix - - - - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - - - - lmtp
anvil unix - - - - 1 anvil
scache unix - - - - 1 scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent. See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# See the Postfix UUCP_README file for configuration details.
#
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman unix - n n - - pipe
flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
${nexthop} ${user}
policy unix - n n - - spawn
user=nobody argv=/usr/bin/perl /usr/sbin/postfix-policyd-spf-perl
[/SIZE]
main.cf
Code:
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
#myorigin = /etc/mailname
smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu)
biff = no
# appending .domain is the MUA's job.
append_dot_mydomain = no
# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h
readme_directory = no
# TLS parameters
smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt
smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key
smtpd_use_tls = yes
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
# information on enabling SSL in the smtp client.
myhostname = server1.gildenident.net
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
#mydestination = server1.gildenident.net, localhost.gildenident.net, localhost.localdomain, localhost
relayhost =
mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
mailbox_command = procmail -a "$EXTENSION"
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
inet_protocols = all
smtpd_sasl_local_domain =
smtpd_sasl_auth_enable = yes
smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes
smtpd_sasl_authenticated_header = yes
#smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,check_policy_service unix:private/policy
smtpd_tls_auth_only = no
smtp_use_tls = yes
smtp_tls_note_starttls_offer = yes
smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom
virtual_maps = hash:/etc/postfix/virtusertable
mydestination = /etc/postfix/local-host-names
Wenn ich von Outlook aus Port 25 benutze signiert er nicht, das ist wohl auch normal. Nur wenn ich wie beschrieben Port 587 benutze, dann hängt er in der Abfrage Benutzername/Kennwort und meldet im syslog:
Code:
Aug 24 05:09:32 server1 postfix/smtpd[6504]: warning: SASL authentication failure: cannot connect to saslauthd server: No such file or directory
Aug 24 05:09:32 server1 postfix/smtpd[6504]: warning: brln-4db8060d.pool.einsundeins.de[77.184.6.13]: SASL LOGIN authentication failed: generic failure
Aug 24 05:09:32 server1 postfix/smtpd[6504]: lost connection after AUTH from brln-4db8060d.pool.einsundeins.de[77.184.6.13]
Aug 24 05:09:32 server1 postfix/smtpd[6504]: disconnect from brln-4db8060d.pool.einsundeins.de[77.184.6.13]
Das ist mit Sicherheit irgendeine Pillepalle aber ich bin echt zu doof dazu....
Wer hat das Wissen mir Dummie zu erklären was da Sache ist. Ich vermute mal das für den Dienst unter Port 587 noch ein paar Einstellungen vom Port 25 (.. also die normalen Einstellungen= übernommen werden müssen. Ich experimentioere gern, meist endet es dann aber in einer Neuinstallation!
Danke im Vorraus
Gruß Sven