smartctl -a /dev/twe0 -d 3ware,0
smartctl 5.43 2012-06-05 r3561 [x86_64-linux-2.6.32-5-openvz-amd64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD753LJ
Serial Number: S13UJ1DPB00566
LU WWN Device Id: 5 0000f0 0090b5066
Firmware Version: 1AA01104
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Tue Jul 2 11:33:37 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (10966) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 184) minutes.
Conveyance self-test routine
recommended polling time: ( 20) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 099 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 086 086 011 Pre-fail Always - 5030
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 30
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 4
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 42
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 10461
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 47917
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 099 099 000 Old_age Always - 384
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 30
13 Read_Soft_Error_Rate 0x000e 100 099 000 Old_age Always - 0
184 End-to-End_Error 0x0037 100 100 099 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 421
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 068 041 000 Old_age Always - 32 (Min/Max 32/34)
194 Temperature_Celsius 0x0022 068 041 000 Old_age Always - 32 (5 80 35 32 0)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 6
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 199 199 000 Old_age Always - 4
201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0
202 Data_Address_Mark_Errs 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 47908 -
# 2 Extended offline Completed without error 00% 43958 -
# 3 Extended offline Completed: read failure 90% 41222 275095156
# 4 Extended offline Aborted by host 90% 41222 -
1 of 1 failed self-tests are outdated by newer successful extended offline self-test # 2
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
